Retrofit digital radio DAB+ on Volkswagen, Skoda and Seat (MIB1, MIB2 and MIB 2.5 system). This upgrade is unique!
Do you have a relatively up-to-date car and don't have a DAB+ digital radio installed? And you miss the many great channels? Then we have the perfect solution for you.
The DAB+ Interface 4506 offers you many new stations, whether regional or national stations. And a lot of special interest channels. And you enjoy digital, crystal-clear and dynamic sound.
This interface has two separately working tuners (dual tuners) and has a permanent service following function. So if the reception quality of the station deteriorates, the interface searches in the background for a service with a stronger reception from this station. FM support is not possible.
The interface is compatible with the MIB systems MIB 1, MIB 2 and MIB 2.5. MIB stands for Modular Infotainment Kit. Learn more about compatibility below.
The included DAB+ window antenna can be used as an antenna. If you have already installed a DAB antenna at the factory, this can be used. The antenna does not require a separate power supply as it is powered via the interface.
By the way: Many customers install this interface almost invisibly, mostly in the trunk or in the area of the glove compartment. All connections are easy to reach there.
Functions:
-
Lots of new channels – Digital Radio supports the DAB/DAB+ Standard.
-
Additional information – The DAB+ radio station provides further information about the program or current short news. The Dynamic Label function provides this information.
-
Fully MIB compatible – Operation is fully integrated via the MMI system. Radio stations are shown on the display. No additional monitors or remote controls required.
-
Important traffic information – To give you a free ride, this interface can provide you with the current traffic information and interrupts the broadcast for this.
-
Twice the best reception – Service-Following means that in the background the interface is constantly looking for a stronger reception option for the selected station. If the interface finds a stronger station, it imperceptibly switches to this station. This interface uses two separate tuners for this.
-
CAN bus Connection – The connection via the CAN bus ensured maximum Quality.
-
Update suitable – In the event of a change or further development, the interface can be updated via the mini-USB Connection.
-
Easy to use – Direct operation via radio and multifunction steering wheel buttons (AD2P/AVRCP Technology).
-
Extremly important protection – The stable and impact-resistant steel housing protects the sensitive electronics over the long term.
Installation:
-
Plug n' Play installation – Easy and fast connection. All connections as plug connection.
-
No Coding – No coding or activation is necessary for this interface.
-
CD changer connection – The interface is integrated into the fiber optic circuit as a CD changer. If you cannot integrate another CD changer because the MMI system cannot manage it, then simply copy your favorite music to your smartphone or to the cloud and you can continue to enjoy the music in the future, then via Bluetooth.
-
Useful Installation guide – Practical installation aids are available to you. Go to Installation examples You will also receive one Step-by-step installation guide (download).
-
Our service promise – We are at your disposal with a live chat or via faq@usb-nachruesten.de until successful installation. If you are not satisfied, you can return the product within 30 days and your purchase price will be refunded.
Operation
- Via the control knob in the center console
- Via the buttons on the multifunction steering wheel
Technical specification
- Size of the box: 107,2 x 92,6 x 25,2 mm (LxWxH)
- Material housing: Metal
- Weight: 280g
- Supply voltage: 8.2 or 12 Volt (max. 150mA)
- Power consumption with the antenna (scope of delivery): 321 mA
- Power consumption without antenna: 281 mA
- Power consumption when not in use: 0,039 mA
- communication and control: CAN bus
Scope of delivery
- Digital Radio Interface 4505 DAB+
- LVDS Connection cable
- DAB+-window antenna with approx. 6,000mm cable and FAKRA connector
- ISO Quadlock wiring harness
- Digital step-by-step installation and user Manual (English/German)
Compatible vehicles
| Volkswagen VW |
| VW Arteon | ab 2017 |
| VW Crafter | ab 2017 |
| VW E-Crafter | ab 2019 |
| VW E-Golf | ab 2014 |
|
VW Polo 4 (Facelift) 9N3VW Polo 4 (Facelift) 9N3VW Golf Sportsvan | ab 2014 |
| VW Golf /4Motion | ab 2013 |
| VW Passat | ab 2015 |
| VW Polo | ab 2015 |
| VW T-Roc | ab 2018 |
| VW Teramont | ab 2018 |
| VW Tiguan | ab 2012 |
| VW Tiguan Allspace | ab 2018 |
| VW Touareg | ab 2018 |
| VW Touran | ab 2016 |
| Skoda |
| Skoda Fabia | ab 2015 |
| Skoda Karoq |ab 2018 |
| Skoda Kodiac | ab 2017 |
| Skoda Octavia | ab 2013 |
| Skoda Rapid | ab 2014 |
| Skoda Superb | ab 2015 |
| Seat |
| Seat Arona | ab 2018 |
| Seat Ateca | ab 2016 |
| Seat Ibiza | ab 2016 |
| Seat Leon | ab 2013 |
| Seat Toledo | ab 2016 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Not compatible vehicles
| Volkswagen VW |
| VW Amarok |
| VW Beetle |
| VW Caddy |
| VW Camper |
|
VW Polo 4 (Facelift) 9N3VW Polo 4 (Facelift) 9N3VW Jetta |
| VW Scirocco |
| VW Sharan |
| VW UP! / E-UP! |
| Seat |
| Seat Alhambra |
| Seat MII |
| |
| |
| |
| |
| |
| |
Compatible radios
Basically: LCD monitor and MIB control unit must be separate.p>
If you click on the radio image, detailed information will be displayed in a new window.
VW Volkswagen
| VW Composition Media |
 |
|
Display-Auflösung:
14,7 cm (5,8 Zoll) - 400x240px
16,5 cm (6,5 Zoll) - 800x480px
20,3 cm (8,0 Zoll) - 800x480px
|
| VW Discover Media |
|
|
Display-Auflösung:
16,5 cm (6,5 Zoll) - 800x480px
20,3 cm (8,0 Zoll) - 800x480px
|
| VW Discover Pro |
|
Display-Auflösung:
20,3 cm (8,0 Zoll) - 800x480px
|
Skoda
| Skoda Bolero III |
 |
Display-Auflösung:
20,3 cm (8,0 Zoll) - 800x480px
|
| Skoda Amundsen III |
 |
Display-Auflösung:
20,3 cm (8,0 Zoll) - 800x480px
|
| Skoda Columbus III |
 |
Display-Auflösung:
20,3 cm (8,0 Zoll) - 800x480px
|
Seat
Seat Media System /
Media System Plus |
 |
|
Display-Auflösung:
14,7 cm (5,8 Zoll) - 400x240px
20,3 cm (8,0 Zoll) - 800x480px
|
Seat Navigation System /
Navigation System Plus |
 |
Display-Auflösung:
14,7 cm (5,8 Zoll) - 400x240px
20,3 cm (8,0 Zoll) - 800x480px |
Generally:
Does the Interface have to be activated / coded?
In certain cases, yes. Please refer to the instructions on the tab Installation + Operation.
Can I code the interface myself?
Yes, we provide instructions. However, we strongly recommend having the coding carried out by a specialist. For them it usually takes a few minutes.
Can I use the buttons on the radio or the multifunction steering wheel to control the Interface?
Yes, to us for regulating the volume and for selecting the previous or the next track. You can find more details in the instruction guide.
Installation:
Do I need additional or special tools for installation?
You need the usual tools or electrical tools. Occasionally our removal tools are needed.
Are there instructions for installation?
In the menu item Installation examples you will find examples of different brands and vehicles for the installation of our products. Since the installation is often very similar, the various steps in the instructions can also be transferred to many other vehicles. We also offer you step-by-step installation instructions.
What can I do if the installation just doesn't work?
The very detailed and illustrated instructions are a great help. If you get stuck with this, please send us an email. In the vast majority of cases, we can resolve problems and questions at short notice by email.
Purchase:
Can I return the device if I don't like the set?
For this we offer you our 30-day right of withdrawal.
There are no reviews yet.