Digital Radio DAB+ with sooo many additional stations. Now retrofit Interface 4501 for Audi MMI 2G system!
Finally an end to bad radio reception or just a few stations. Great sound and lots of new channels. With this set you can successfully upgrade the reception of Digital Radio DAB+. You enjoy digital, crystal-clear sound and a variety of radio stations. Also many national broadcasters.
The interface has the service following function. So if the reception quality of the station deteriorates, the interface searches in the background for a service with a stronger reception from this station. In addition, the station search function offers FM support. So if the DAB station is not available, the interface will switch to the same station and corresponding FM frequency.
All Audi MMI 2G systems are supported, the MMI 2G High systems with a software index of at least SW1110 are supported. This is how you can query the software index: Press and hold the SETUP button followed by RETURN on the control unit in the center console for approx. 10 seconds until the display menu changes to maintenance mode. Then confirm the view by pressing the MMI CONTROL KNOB. The SW index is then shown on the third line of the display. Here is also a video for it: Audi MMI 2G Software-INDEX A6 A8 Q5 Q7 A5 A4 - YouTube
The included DAB+ window antenna can be used as an antenna. Any factory-installed DAB antenna can also be used. The antenna does not require a separate power supply as it is powered via the interface.
You can also use this interface in parallel with our Bluetooth Interface 4201.
By the way: Many customers install this interface almost invisibly in the area of the glove compartment or in the trunk. All connections are easy to reach there.
Functions:
-
Lots of new channels – Digital Radio supports the DAB/DAB+ Standard.
-
Additional information – The DAB+ radio station provides further information about the program or current short news. The Dynamic Label function provides this information.
-
Fully MMI compatible – Operation is fully integrated via the MMI system. Radio stations are shown on the display. No additional monitors or remote controls required.
-
Important traffic information – To give you a free ride, this interface can provide you with the current traffic information and interrupts the broadcast for this.
-
Always the best reception – Service-Following means that in the background the interface is constantly looking for a stronger reception option for the selected station. If the interface finds a stronger station, it imperceptibly switches to this station.
-
MOST bus Connection – Maximum quality is possible via the fiber optic technology of the MOST connection.
-
Update suitable – In the event of a change or further development, the interface can be updated via the mini-USB Connection.
-
Easy to use – Direct operation via radio and multifunction steering wheel buttons (AD2P/AVRCP Technology).
-
Extremly important protection – The stable and impact-resistant steel housing protects the sensitive electronics over the long term.
Installation:
-
Plug n' Play installation – Easy and fast connection. All connections as plug connection.
-
No Coding – No coding or activation is necessary for this interface.
-
CD changer connection – The interface is integrated into the fiber optic circuit as a CD changer. If you cannot integrate another CD changer because the MMI system cannot manage it, then simply copy your favorite music to your smartphone or to the cloud and you can continue to enjoy the music in the future, then via Bluetooth.
-
Useful Installation guide – Practical installation aids are available to you. Go to Installation examples You will also receive one Step-by-step installation guide.
-
Our service promise – We are at your disposal with a live chat or via faq@usb-nachruesten.de until successful installation. If you are not satisfied, you can return the product within 30 days and your purchase price will be refunded.
Download:
System Check
To find out which MMI system you have, please do the following.
- Your display is not colored but monochrome red. Then you have an MMI 2G Basic. Would you like to know the version number of your MMI 2G Basic? Then press and hold the SETUP and RETURN buttons for 3 seconds. The version number has 4 digits and is displayed under the menu item "SW Rel:".
- Your display is colored. Please check the software version number.
You can find it under SETUP / SETTINGS (top right). Now please select VERSION (at the bottom of the list).
You will now find the software version number in the first position. The notation of the software version number shows you the version of your MMI system:
| MMI 2G System |
| SW: XX-XX XX-X-X XXXX |
| MMI 3G Basic System |
| BNav_XX-XXXXX |
| MMI 3G High System |
| HNav_XX-XXXXX |
| MMI 3G Plus/Touch System |
| HN+_XX-XXXXX oder HN+R |
Operation
- Via the control knob in the center console
- Via the buttons on the multifunction steering wheel
Technical specification
- Size of the box: 65x90x35 mm (LxWxH)
- Material housing: Metal
- Weight: 95g
- Supply voltage: 12 Volt
- Power consumption with the antenna (scope of delivery): 180 mA
- Power consumption without antenna: 145 mA
- Power consumption when not in use: 0 mA
- communication and control: MOST bus
Scope of delivery
- Digital Radio Interface 4501 DAB+ for MMI 2G
- DAB+-window antenna with approx. 6,000mm cable and FAKRA connector
- Connection cable for power supply
- Fiber optic cable (MOST bus)
- Digital step-by-step installation and user Manual (English/German)
Compatible vehicles
| Audi |
| Audi A4 |up to 2009 |
| Audi A5 | up to 2009 |
| Audi A6 | up to 2009 |
| Audi A6 Allroad | up to 2009 |
| Audi A8 | up to 2011 |
| Audi Q7 | up to 2009 |
| Audi RS6 | up to 2011 |
Compatible radios
If you click on the radio image, detailed information will be displayed in a new window.
Audi
| Audi MMI 2G System BASIC |
 |
| Audi MMI 2G System HIGH |
 |
Product safety information
Manufacturer information:
Juna
, ,
Responsible person:
onTrade GmbH
Ahornweg 8
Niedersachsen
Langlingen, Deutschland, 29364
ralf.waldau@ontrade.biz
Generally:
Does the Interface have to be activated / coded?
No. Coding or activation via the vehicle's diagnostic system is not necessary.
Can I use the buttons on the radio or the multifunction steering wheel to control the Interface?
Yes, to us for regulating the volume and for selecting the previous or the next track. You can find more details in the instruction guide.
I already have additional devices installed. Can these still be used?
You can connect a variety of systems to the fiber optic circuit.
- AMI interface
- CD changer
- Bluetooth interface
- Interface for digital radio DAB +
It is important that the fiber optic circuit remains closed. For this, we enclose a fiber optic Y cable with every product.
Installation:
Where and how is the Interface connected exactly?
The Interface can be connected to the CD changer connection. Alternatively, it can be connected to another interface or directly to the MMI system or to the control unit.
Do I need additional or special tools for installation?
You need the usual tools or electrical tools. Occasionally our removal tools are needed.
Are there instructions for Installation?
In the menu item Installation examples you will find examples of different brands and vehicles for the installation of our products. Since the installation is often very similar, the various steps in the instructions can also be transferred to many other vehicles. We also offer you step-by-step installation instructions.
What can I do if the installation just doesn't work?
The very detailed and illustrated instructions are a great help. If you get stuck with this, please send us an email. In the vast majority of cases, we can resolve problems and questions at short notice by email.
Purchase:
Can I return the device if I don't like the set?
For this we offer you our 30-day right of withdrawal.
